XT60 Female to Barrel Connector (Premium)

Description

XT60 Female to Barrel Connector (Premium). Condition is New. Shipped with USPS First Class, priority option also available.
This is a high quality XT60 to barrel connector, built with a solderless barrel. It is the most beefy and solid adapter you will find on the market as it is hand made by e-bike technicians for the kind of high durability needed to stand up to rough treatment.
Less mechanical fatigue than factory built adapters at the barrel since it is built with a solderless barrel. These barrels are overbuilt for high rigidity.
If you ever pull the wires out the end, they can be reattached with a phillips screwdriver.
Protected with a high quality thick heat shrink.
Reinforced with liquid electrical tape under the heatshrink.
Gold plated female XT60 connector.
Built with 14AWG multistrand silicone jacketed wire for low electrical resistance and good flexibility.
Both XT60 and barrel are marked with polarity (under the heatshrink) if ever needed for reference; if you are not sure of polarity, compare it to a multimeter reading before plugging into a power source!
Adapter roughly 3" long.
Ebike users:
WORKS AS AN ADAPTER FOR CURRENT MODEL LUNACYCLE ADVANCED AND MINI CHARGERS
This barrel fits standard charge ports with ~2.1mm pin; the barrel length is roughly 8-10mm and outer diameter is approx 5.44mm