FS-12 Commercial cold press juicer - Pre-owned

Description

Freshly Squeezed LLC
The FS-12 hydraulic juice press is the smallest footprint commercial cold juicing press available on the market: 22” wide x 30” deep. It can fit into the tightest of spaces and still produce up to 12 gallons of juice per hour. The FS-12 press is capable of producing hundreds of bottles of cold pressed juice a day and can handle any vegetable, fruit, leafy green, grass, herb and nut. The FS-12 press has all the necessary certifications to make any health department happy and is perfect for juice bars, health food stores, juice cleansing facilities and other small to medium juicing operations.
Despite its compact size, the FS-12 is extremely robust and powerful with the force of 10,600 lbs applied in each squeeze. The juice produced contains less than 1% solids, so no extra filtering is necessary. Vertical squeezebox design allows for even pressure on the product. FS commercial hydraulic juice presses squeezes more gently than other methods. This means juice is extracted without over-crushing cells or creating unwanted heat.
Commissioned by juicing industry specialists who understand the needs of a modern juicing consumer, the FS-12 press has many unique features like wash down design allowing spraying of the whole machine while cleaning, two emergency stop buttons, motor overload protection and complete safety guarding.
If you plan on manufacturing vegetables, nuts, or leafy greens, then we recommend the
Sammic CKE-3, CKE-5, or CKE-8
vertical cutter/emulsifier to go along with this unit in order to pulp the product before putting it into the press. This will allow the maximum surface area to be exposed for pressing purposes without damaging enzymes or heating up the product.
All our FS cold juicing press models – FS-12,
FS-20 PLUS
,
FS-30 PLUS
,
FS-45
, FS-60, FS-90 – conform to ANSI/NSF Standard 8 and has the sticker to prove it for your health department inspection. This means you can visually verify that all surfaces are clean. We also weld our seams and don’t use “bolt together” construction methods that create crevices and require silicone sealants that eventually wear and can end up in your juice. In addition holes and crevices are hard to clean and could harbor bacteria. We don’t use gaskets that wear and shed as a shedding gasket ends up in your juice. We went the extra mile when we created our FS presses. We didn’t cut corners.
The FS cold juicing presses are NSF compliant and made in USA. The presses can be manufactured in 110V or 220V.
Advantages Of Freshly Squeezed FS-12 and FS-30 Cold Juice Presses
FS-12
– the most compact cold press on the market:
> Produces 10-12 gallons/hour = 80-100 x 16 ounce bottles/hour
> Unique bag technology: fold-over-flap and better weave allows better yield and more product to be produced per squeeze
> Longer lasting bags
> Takes up only 5 square feet of space and can be stored away with ease
> 8800 pounds of pressure per squeeze
> Locking mechanism to press more juice out of every squeeze
> Sturdy stainless steel frame
> NEARLY 3 TIMES LESS EXPENSIVE than the competition
> FS in-house finances these units for up to 12 months
> Multiple year warranty and service plans available
> 9AM to 9PM service line
> Equipment of choice for all juice bar start ups and those finally moving on to cold press technology
FS-30
– the workhorse of cold presses:
>Produces 20-30  gallons/hour = 160-240 x 16 ounce bottles/hour
>Unique bag technology: fold-over-flap and better weave allows better yield and more product to be produced per squeezed
>Longer lasting bags
>Takes up only 10 square feet of space and can be stored away with ease
>28,000 pounds of pressure per squeeze
>Up to 80% yield.  We repeat: UP TO 80% YIELD
>Locking mechanism to press more juice out of every squeeze
>Sturdy stainless steel frame
>More bang for the buck: superior technology for still less $$$ than the competition
>FS in-house finances these units for up to 12 months
>Multiple year warranty and service plans available
>9AM to 9PM service line
>Equipment of choice for heavy juice manufacturers: high volume juice bars, grocery stores, commercial kitchens
AVERAGE JUICE YIELD
(Using FS-30 with 5/16” shredder blade)
Due to factors such as level of ripeness, shredding type and number of press cycles, the figures below are average estimates.
FRUIT TYPE / YIELD / NUMBER OF PRESSES
PINEAPPLE / 80% / 2
CARROT / 67% / 2
APPLE / 84% / 2
SPINACH / 86% / 2
KALE / 59% / 2
APPLICATIONS:
Juice bars
Small juice cleanse businesses
Produce markets
Health food stores
Fitness centers, resorts and spas
SPECIFICATIONS:
Output: 12 Gal per hour
Force: 10,600 Lbs
1 Gal oil reservoir
Power: 20 Amp, 110 Volt/220V, 60HZ, single phase
Weight: 250 lb
Dimensions: 30 x 22.6 x 39 in. with castors
FS-12 PRESS CUSTOMERS:
Whole Foods                                               Rawkin Juice, CA
Purely Pressed, FL                                       Green Nectar Juicery, NJ
Beyond Juice, MI                                         Infiniteus Rocks & Juice, IL
Pressed, MA                                                Juice Up, TX
Bgabs Goodies, IL                                       One Love Juice and Smoothies, TX
The Mill Juice Shop, NV                              Rancho Tres Rios, CA
Nations Nectar, TX                                     Juice Love, CA
Krisp Fresh Living, CA                                 Vince and Joe’s Market, CA
Juice Vibe, NC                                             Live Juice Bar, NY
The Nutty Dairy, Ireland                             Myelin, Singapore
AND MANY MORE….
FS-12 video:
https://www.youtube.com/watch?
v=5FrPaXjH-lM
FS-30 video:
https://www.youtube.com/watch?
v=Lf9yeSa44_g
FS-12 page:
http://www.
drinkfreshlysqueezed.com/fs-
12-cold-juicing-press/
FS-30 page:
http://www.
drinkfreshlysqueezed.com/
freshly-squeezed-fs-30-cold-
juice-press/
UI-487