DJI S1000 / S900 Battery Charger Connector Set AS150 7MM / XT150 6MM Male

Description

Item is In Stock and Ready to Ship!
Have you just dropped thousands of dollars on a DJI S1000 or S900 because you're into aerial photography / videography, realize you need to charge your batteries but don't know what connectors you need in order to charge batteries with the stock setup on a LiPo charger? Have you bought a set of AS150 thinking that's all you need only to find out the black side doesn't fit?
DJI, in a move to prevent plugging the batteries into the octocopter incorrectly decided on a solution I've never before seen in the R/C industry - they used 2 different connectors - literally making it impossible to plug in the wrong way.
It's an effective solution for the R/C novice, but one not clearly or consistently conveyed to the consumer
- in some DJI literature I've seen them reference both AS150 and XT150 where in other places they refer to the combination simply as "AS150".
For the red wire they use an AS150 which have 7MM bullets, the male bullet on the vehicle has a resistor built into it which prevents against sparks normally seen in high voltage applications (that's why they have you plug the red side in last). For the black wire they went with an XT150 connector with a 6MM bullet. Both are very high quality, gold plated bullet connectors with sturdy plastic housings however it's caused massive confusion on message boards and I've had plenty of inquiries (always post-order) asking if what they just purchased is what they really need...
What I've put together is what you'll need to solder onto your charger adapter in order to connect to the stock batteries on the S1000 & S900 into a standard R/C lipo charger.
Each item contains:
(1) AS150 Red Housing (Female)
(1) AS150 7MM Bullet (Male)
(1) XT150 Black Housing (Female)
(1) XT150 6MM Bullet (Male)
These 4 pieces are honestly all you need to fully equip your charger to plug into an S1000 or S900 battery.
If you need the opposite - a 4 piece set to make your lipos plug into the DJI, or, a 4 piece set to replace the stock connectors on the DJI let me know as I have those pieces in stock also.
I source my connectors from the same factory that DJI does, so they're 100% guaranteed to work with your octocopter.
I have plenty of these in stock and ready to ship - same day shipping for items purchased before 8:00AM Eastern Mon - Fri.
Free shipping will be via USPS First Class mail, for those of you in a hurry I also offer Priority and Express Mail upgrades.
To minimize the chance of returns, please view picture(s) closely and ask any questions prior to purchase.
Thanks for looking! Chris.