Clausing 20” Floor Drill Press, 150-2000 RPM Vari-Speed and Power Down Feed Mode

Description

Features and Benefits:
Clausing Variable Speed Drill Press with two speed motor, allows you to dial to the best rpm for the tool and material while the job is running. 150 to 2000 rpm – speeds to drill large holes, small holes to spot-face, counter-bore and ream. A flip of the switch changes from low range to high range, perfect for production applications when adding quick change tooling. Greater capacity, too, with Clausing 2 Speed, production rated 1” in cast iron, ¾” in steel. Clausing’s heavy-duty drive (Three V-belts and a cog belt) delivers positive full power to the spindle at all speeds. 208-230 volt 3 phase voltage.
Specifications
Machine Style
Floor Drill
Drive Type
Variable Speed Sheave Pulley
Spindle Speeds (RPM)
150-2000
Column to Spindle Center (in)
10
Spindle Nose
3MT
Spindle Travel (in)
6.5
Spindle to Base Max. (in)
43.375
Column Diameter (in)
4
Column Length Standard (in)
66
Adjustable Table Surface (in)
22 X 19.5
Work Table T-Slots (in)
1/2
Table and Base Centers (in)
9
Base Size (in)
15.5 x 13
Drill Capacity with Manual Feed (in)
1.25
E-Stop Switch
Optional
Forward/Reverse Switch
Optional
Two Speed Switch
Yes
Voltage
208-230
Phase
Three
Motor Horsepower
1 1/2
Machine Weight (lbs.)
600
Machine Dimensions (LxWxD in)
22 x 36 x 69
Machine Features:
Variable Speed Drive – with sheave pulleys system and two speed switch
Heavy-Duty Precision Head – all bearing surfaces are precision bored simultaneously for exact alignment. Eight ball bearings support the drive and spindle, lower spindle bearing has double row to absorb both radial and thrust load
Precision Ground 22” x 19’5” thru coolant adjustable table and elevation mechanism
66” tall x 4” diameter 3/16” wall column for greater rigidity
½” cored T-slots on 9” centers for table and base
2 ½” diameter quill 3MT taper spindle, with 6 ½” travel, and thread adjustable depth stop
Optional coolant system
Mesh top belt guard
Telescopic spindle guard